Shadowrocket Interface Guide: What Home, Config, Proxy, Direct, Data, and Settings Mean

Learn what Home, Config, Data, and Settings do in Shadowrocket, and how routing terms like Proxy, Direct, and Reject affect your traffic.

At a glance

Home manages connections and servers, Config manages configuration files, Data shows traffic statistics, and Settings controls app behavior. Proxy, Direct, and Reject describe how requests are handled; they are not additional pages. This guide uses the iPhone and iPad English interface as its reference and is for readers who are new to Shadowrocket and can find the controls but are unsure what they do. Following the guide by page, routing mode, and rule action helps distinguish a selected server from an active configuration and the actual route taken by a request. Navigation on other platforms may differ.

Home, Config, Data, and Settings: Understand Each Page’s Role

First identify which page the instructions refer to, then locate the relevant item on that page. Home, Config, Data, and Settings are navigation labels, not protocol names or types of network routes. A server listed in Home is not necessarily used for every request, and a configuration shown in Config is not necessarily active.

Interface labelWhat it doesWhat to check
HomeView the connection toggle, server list, and Global Routing options.Check that the selected server, connection status, and routing mode match your expectations.
ConfigManage configuration files, including their rules and other settings.Check which file is active and whether its rules and their order are correct.
DataView traffic statistics recorded by the app.Check whether upload and download figures change during a defined observation period.
SettingsAdjust app settings, including behavior options such as On Demand.Check whether you changed connection triggers, update behavior, or another app setting.

Pay attention to capitalization and context. Config can refer to the configuration-file page or to a mode in Global Routing. DIRECT in a rule is a policy keyword, while Direct on Home is a routing mode. Similar wording does not mean they are at the same level of the interface.

4 page labels
This guide covers: Home / Config / Data / Settings
4 mode labels
Global Routing:Config / Proxy / Direct / Scene
4 rule types
Examples in this guide: DOMAIN-SUFFIX / GEOIP / IP-CIDR / FINAL

Home: What the Connection Toggle, Servers, and Subscribe Do

Home is where you manage connections. A server entry stores connection parameters such as Type, Address, Port, and any authentication details required by the protocol. This guide assumes you already have valid server details or a subscription. Installing the app alone does not provide these parameters or create a usable server entry.

Shadowsocks, VMess, VLESS, Trojan, Hysteria2, and WireGuard under Type are different protocol types, not routing modes. Choose the type that matches your existing configuration; do not substitute one just because its name is more familiar. Subscribe adds a subscription source. A subscription usually contains information for multiple servers, which is a different concept from the connection protocol used by an individual server.

  1. Check the list

    Open Home and confirm that your server entries are listed. If the list is empty, first prepare your existing server details or subscription URL. Repeatedly toggling the connection switch will not resolve a missing entry.

  2. Add a subscription

    To import an existing subscription, go to Home → “+” in the upper-right corner → Type → Subscribe. Enter your subscription URL and save. Do not enter a single-server share link as a subscription URL.

  3. Select a server

    Return to Home and confirm that the subscription has created server entries, then select the one you intend to use. The name is just a label; the address, port, and protocol parameters determine the actual connection target.

  4. Check the mode

    Go to Home → Global Routing and check Config, Proxy, Direct, or Scene. If you need traffic routed according to configuration rules, also check the active configuration on the Config page—not just the selected server.

  5. Connect

    Return to Home and turn on the connection switch. If a system VPN configuration permission prompt appears the first time you connect, follow the system instructions. Then test with one specific webpage and observe the result; avoid changing several settings at once.

Global Routing: Config, Proxy, Direct, and Scene Explained

Global Routing determines the overall routing mode. Proxy sends requests through the proxy route; it does not guarantee that a server is reachable. Direct uses a direct connection and does not necessarily remove the system VPN indicator. Config routes traffic according to the active configuration. Scene applies routing behavior based on configured conditions, so check the scene settings as well.

ModeWhat it meansWhat to check
ConfigRoutes requests according to the rules in the active configuration.Check the active file on the Config page, rule matching order, and final policy.
ProxyUses proxy routing for traffic overall.Check whether the selected server is reachable, its authentication details, and the connection result.
DirectUses direct connections for traffic overall.Check whether the current network can reach the destination directly. This does not verify that a server is working.
SceneApplies routing behavior based on the configured scene conditions.Check whether the current network matches a scene and what settings apply when it does.

For example, the same server can remain selected while switching from Proxy to Config causes some requests to connect directly. This is usually explained by the rules; a change in a website’s apparent exit location alone does not mean the server was replaced. With Scene, changes to the network connection can also affect the result, so note whether you were on Wi-Fi or cellular when reporting an issue.

Two Checks: Overall Mode and Individual Requests

Overall mode
  • Go to Home → Global Routing.
  • First check whether Config, Proxy, Direct, or Scene is active.
  • Change only one mode at a time during testing, and note its original value so you can restore it.
Rule action
  • In Config mode, check the active configuration.
  • A matching rule can specify PROXY, DIRECT, REJECT, or a policy defined in the configuration.
  • Check which rule matched the specific request; do not infer the behavior of all traffic from one website.

Check the overall mode first, then the matching rule. Seeing Proxy or DIRECT on its own is not enough to determine the complete route.

Config and Rules: How Proxy, Direct, and Reject Apply to Requests

The Config page manages configuration files; the [Rule] section contains rules. The examples below teach rule syntax and are not complete, usable configurations. The example domain and reserved IP range illustrate matching behavior and do not refer to any service. Understand each line first, then check the file you currently use. Do not overwrite your existing configuration.

[Rule]
DOMAIN-SUFFIX,example.com,DIRECT
IP-CIDR,192.0.2.0/24,REJECT,no-resolve
GEOIP,CN,DIRECT
FINAL,PROXY

Rules are evaluated in order, so an earlier match can prevent later rules from handling a request. If a broad rule comes first, a more specific rule later may never match. When troubleshooting, first confirm that the file is active, then check the rules from top to bottom. Finding a domain in the file does not prove that the request used that rule.

PROXY
Sends matching requests through the corresponding proxy route. Whether the connection succeeds still depends on the server and its parameters.
DIRECT
Connects matching requests directly to their destination without using a proxy server. Results still depend on the local network, DNS, and whether the destination is reachable.
REJECT
Blocks matching requests. If some webpage resources fail to load as a result, check the rules before assuming the server is at fault.

Data and Settings: Don’t Confuse Traffic Stats with Connection Triggers

Data shows traffic statistics; it is not a server plan balance page. Changes to upload and download figures only indicate traffic within the measured scope. They do not, by themselves, prove that a website loaded successfully or that all requests used the same proxy. For a meaningful comparison, keep the observation period consistent: note the figures, make one visit, then return to check for changes.

On Demand in Settings controls when connections are established on demand; it does not select DIRECT or PROXY for each domain. Settings → On Demand and Config → active configuration → [Rule] answer different questions: the former controls when a connection is triggered, while the latter controls how requests are handled in rule mode.

  1. To check for traffic changes: Open Data and note the current statistics, visit a specific webpage, then return to Data and compare.
  2. To check whether a connection resumes automatically: Go to Settings → On Demand, check that it is enabled and review the existing conditions, then return to Home and observe the connection behavior.
  3. To check how a domain is routed: First confirm the mode in Home → Global Routing, then check the active file and relevant rules in Config.
  4. To check DNS: Record the current settings and relevant configuration details, change just one item, then test again. Successful DNS resolution does not mean server authentication succeeded; assess them separately.

Common Questions About Interface Terms: Check the App Itself

A server is selected on Home. Why are requests still going direct?

Open Home → Global Routing first. If the mode is Direct, traffic uses direct connections overall. If it is Config, check in Config whether the active rules specify DIRECT. If it is Scene, also check which scene matches the current network. Selecting a server does not mean every request will use it.

Is Config on the Config page the same button as Config in Global Routing?

No. The former is a page for managing files; the latter is a mode that routes traffic according to a configuration. First confirm the active file on the Config page, then select Config in Home → Global Routing, and finally check the rules in that file. Do not reduce these three steps to “tap Config.”

Data shows a download figure. Does that mean the server is working?

The figure alone is not enough to tell. First check the time period and scope covered by the statistics, then verify the destination, Global Routing mode, and actual page result. Traffic over a direct connection is not evidence that the proxy route is working.

Why didn’t my rules change after updating Subscribe?

Subscribe refreshes the information provided by the subscription; it does not replace the rules file currently in use in Config. Return to Home and check the server entries, then open Config and inspect the active file. If the configuration needs updating, update it from its source and keep the original file so you can restore it.

What if the menu labels in a guide don’t match their positions on my device?

First identify the page—Home, Config, Data, or Settings—then look for the relevant feature label rather than relying on screen coordinates. When describing an issue, include the device platform, page, full navigation path, and selected mode. Before sharing a screenshot, hide server addresses, subscription URLs, and authentication details.

A useful issue report might say: “iPhone, Home → Global Routing is set to Config; the existing file is selected in Config; one specific website fails to open, but other sites work.” Add the relevant rule and test results. These details make it easier to determine whether to check routing, DNS, or server parameters than a report that only says “connected but not working.”

Official Shadowrocket Downloads